


Med Sculpt is an innovative computerized system for body massage and ultrasound diathermy that allows a non invasive and virtually painless treatment.
Med Sculpt operates through a special membrane that massages the tissues. A microprocessor controls the movements of the membrane that lifts, folds and presses the tissues with an ondulatory motion according to a sequence specifically optimized for the involved body area to treat and the pathology or imperfection.
The ultrasound acting deeply on the tissues due to the diathermic effect.






|
|
| Voltage supply | 220 ÷ 240 Volt AC (100 ÷ 130 V) 50/60 Hz monophase. |
| Line fuses | 4 AT 230 V (6.3 AT for 100 ÷ 130 V version) |
| Power absorption | 500 VA |
| Max Vacuum | 850 mbar |
| Application handpieces | 3, Elastomeric, Ultrasonic, High Brilliance |
| Preselected Programs | 75 preselected programs with 4 level of power |
| Ultrasounds frequency | 3 MHz (10 % allowance) |
| Max ultraounds density | 3 W/cm2 max |
| Safety Class (according to CEI 60601-1) | 1 |
| Type | BF |
| Protection grade (IEC 529) | IP20 |
| Dimensions | 550 x 800 x h1860 mm |
| Weight | 52.5 kg |
| Conformity to rules | CEI EN 60601-1 (IEC 601-1) – CEI EN 60601-1-2 (IEC 601-1-2) - CEI EN 60601-1-4 (IEC 601-1-4) - FDA 510(k) K053041 |
| Operating conditions | Temperature: 15° - 40° C - RH 65% maximum Max altitude: 2000m above sea level |
| Storing conditions | Temperature: 0° - 45° C - RH 80% maximum |


